Browse all practice questions for the G36 New York Propane License Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

G36 New York Propane License Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is the primary reason for ongoing training of propane technicians?
  • Which statement about general supervision is accurate?
  • What is the purpose of a manometer or pressure gauge in a propane system?
  • Which NFPA standard governs electrical safety considerations in propane installations?
  • Which of the following signs may indicate a propane system leak even if you cannot smell propane?
  • What is the standard method to check for leaks during installation or service?
  • How should you handle and transport propane in a vehicle?
  • Why should you avoid using copper tubing for propane piping in many installations?
  • Which device qualifies as a Power Industrial Truck?
  • Which statement about regulator testing during a post-installation check is true?
  • What is the minimum distance required between LPG/CNG containers/heaters and the manhole opening?
  • What type of fire extinguisher is appropriate for propane fires?
  • Who should repair defective gas equipment?
  • What should you do if you observe a dented or damaged propane cylinder?
  • Which statement about site-specific permits is true?
  • Where should propane cylinders be stored to minimize hazards?
  • LPG is short for which term?
  • Why is it important to ensure a relief valve does not vent continuously?
  • What is the maximum hose length allowed in LPG/CNG installations?
  • Why is it dangerous to have open flames near propane storage?
  • What is the purpose of CSST bonding and grounding in LPG systems?
  • Is cylinder color a reliable indicator of propane contents?
  • What is the function of a cylinder safety relief device (PRD)?
  • Which statement about open flames is accurate?
  • Class A fires involve which materials?
  • What is the purpose of proper vent clearance for appliance exhaust?
  • Why should the cylinder valve be closed when the cylinder is not in use?
  • When performing cylinder maintenance, what is the purpose of requalification?
  • Which statement about moving compressed gas containers is true?
  • What records are typically required when transferring or retiring propane cylinders?
  • What safety step is required when using CSST with propane?
  • Are farm vehicles considered Power Industrial Trucks?
  • In propane system terminology, what is PSI used for and where is inches of water column used?
  • What does SCF stand for in gas measurement?
  • How can you verify the accuracy of a pressure gauge in a propane system?
  • What is the primary purpose of the regulator in a compressed gas system?
  • Why is ongoing training essential for propane technicians?
  • Class C fires involve what kind of equipment?
  • Standard portable LPG containers are allowed to charge to a maximum of how many pounds in weight?
  • What is a primary safety benefit of adequate ventilation beyond removing combustion byproducts?
  • Are LPG/CNG containers or heaters allowed inside the manhole?
  • What is the difference between a POL valve and a Type 1 (ACME) valve on cylinders?
  • What role do local fire codes play in propane system installation?
  • What must be done before starting work if dangerous vapors are detected?
  • Which statement best defines a flammable gas according to the cited criteria?
  • What is described as the easiest way to extinguish a gas fire caused by a leak?
  • Where should propane cylinders be stored when not in use?
  • Which statement correctly describes the proper leak-test sequence after piping installation?
  • Which statement about bonding and grounding in propane installations is correct?
  • What should be included in a post-installation propane system inspection?
  • Who is authorized to perform the annual portable fire extinguisher inspection?
  • What is the primary hazard when propane leaks in an enclosed space and what action should you take immediately?
  • What method should never be used to check for leaks?
  • Which statement correctly describes CNG?
  • What labeling and signage are typically required around a propane storage area?
  • Why must ignition sources be kept away from propane storage and work areas?
  • Which item is NOT typically included in the documentation a propane service company should maintain on jobs?
  • How should an emergency shut-off valve be positioned for rapid access?
  • What is the primary hazard when propane leaks occur in an enclosed space?
  • How should CSST be bonded to comply with safety requirements?
  • How should empty or in-use gas containers be counted for storage quantity?
  • At the end of each workday, what must be done with LPG/CNG containers on a site with a city-wide permit?
  • Which of the following bonding details is required for CSST safety?
  • In propane safety, which statement is true about odorant mercaptan?
  • Which is NOT considered an open flame?
  • Which standards govern safe propane installation in New York?
  • What should be done if a leak of flammable gas or oxygen is detected?
  • Where should the dry chemical stream be directed?
  • Which device is not typically used to monitor propane leaks in buildings?
  • Which entity should ensure compliance with NY licensing and code requirements for final sign-off?
  • What does CSST bonding aim to prevent?
  • What is the key reason a regulator is necessary in a home propane system?
  • What basic practices help prevent propane leaks from cylinders during storage and handling?
  • Which statement describes hose requirements for LPG/CNG systems?
  • Where should indoor compressed gas storage and use areas be located?
  • In the event of a propane leak indoors with no flame, what is the best immediate action?
  • What is the primary purpose of the LPG regulator?
  • What should you ensure when connecting hoses and regulators to appliances?
  • Which statement correctly describes LPG piping materials in residential systems?
  • The excess flow check valve may do what if the control valve is opened too quickly?
  • LPG/CNG storage must be located away from which hazards?
  • Which statement about propane leaks in enclosed spaces is correct?
  • Which practice is required when labeling compressed gas containers?
  • Name common piping materials used for residential propane distribution.
  • Hot work operations must be conducted at least what distance from combustibles or be shielded?
  • What are the typical components of a propane appliance connection?
  • LPG Container must be marked with which of the following information?
  • Which of the following is considered LPG according to the definition?
  • Which statement about MAPP-gas is correct?
  • Why should propane cylinders be transported upright?
  • Why are vapors dangerous in manholes?
  • CSST piping requires which safety measure?
  • What should you check on hoses and regulators before use?
  • What is required before moving compressed gas containers?
  • If the propane odor is faint or not detected, what should you do?
  • Which action would best indicate incomplete combustion when inspecting a propane appliance visually?
  • P.A.S.S. stands for which sequence?
  • A city-wide permit is valid for up to how many days?
  • Under personal supervision, where must the supervisor be present?
  • What is the correct action if a cylinder valve is hard to turn or feels stuck?
  • Which method is used to verify there are no leaks after a new propane installation?
  • How can improper combustion be identified visually?
  • What is the role of a leak detection detector in LPG installations?
  • If you detect a propane odor or leak, what is the first critical action?
  • How often must LPG containers be tested by DOT-approved vendors?
  • Excessive flow check valve requirements state that:
  • How should propane cylinders be transported in a vehicle?
  • How is gas piping sized for a residential propane system?
  • Which of the following is NOT listed as a hazard to keep away from compressed gas containers?
  • During leak tests, which sign indicates a leak when using a soap solution?
  • Where is the typical main shutoff located for a propane system?
  • Which storage scenario is identified as a hazard due to potential drop distance?
  • Which statement about nonmetallic piping and components in LPG/CNG installations is true?
  • Which description best matches an asphalt melter?
  • Define backdraft in a propane system and how to prevent it.
  • Why are hydrostatic tests required for propane cylinders?
  • Why is it important to keep the gas system clean and free of debris near valves and regulators?
  • Which condition indicates the need to evacuate and ventilate a propane storage area immediately?
  • What role does ventilation play in a propane installation?
  • How does propane differ from air in terms of density and how does that affect leak behavior?
  • If you detect a propane leak and cannot evacuate safely, who should you contact?
  • For standard LPG containers, the pressure relief valve operates properly only if the container is in which orientation?
  • Why is training and documentation important for propane technicians?
  • What happens after the annual portable fire extinguisher inspection is completed?
  • Who should perform the final inspection and sign-off after a propane installation in New York?
  • From which direction should the flame be approached when using an extinguisher?
  • What temperature range should be avoided to protect compressed gas containers?
  • What is the correct regulatory requirement before using any LPG container to fuel an appliance?
  • Where is the control valve located on a gas container?
  • Which statement best describes safety practice when performing maintenance on propane lines?
  • What should you do if you hear an audible hiss near a propane line?
  • What should you do to protect the propane cylinder valve during transport?
  • What is the purpose of the Type 1 valve's OPD feature?
  • Why is bonding and grounding important in propane installations?
  • When portable LPG containers are moved, what must be done?
  • What is the correct method to check for leaks on a piping system after installation?
  • What ventilation requirements are generally necessary for propane storage areas?
  • What does an Overfill Protection Device (OPD) on a propane cylinder do?
  • What does a site-specific permit authorize?
  • What is the general purpose of an emergency shut-off valve in a propane system?
  • Codes for propane installations typically aim to ensure safety by which of the following?
  • Which statement about Class D fires is true?
  • Why is odorant (mercaptan) added to propane and what does it enable?
  • What is the correct way to perform leak tests without creating a fire hazard?
  • What documentation should be kept after completing a propane installation or service?
  • Which of the following is a recommended practice after completing propane work to support ongoing safety?
  • Tar kettle is designed to heat tar using flame to heat a vessel, but which is excluded?
  • Storage of compressed gas containers must be kept in which orientation?
  • Universal type LPG containers may be used in which orientation?
  • Two-stage regulators function by performing which primary action?
  • What is the maximum travel distance to the portable fire extinguisher from the work location?
  • What general safety rules apply when working around propane systems in NY?
  • How often must propane cylinders be requalified or visually inspected under federal regulations?
  • How should the control valve be opened?
  • What should you do if you smell propane or detect a leak?
  • CNG stands for which term?
  • Which device should be used to detect LPG leaks beyond relying on odor alone?
  • Which statement about container identification and color is correct?
  • What risk does a propane leak pose in an enclosed space?
  • What is a typical cause of regulator freeze and how can it be prevented?
  • Which PPE should be used when handling propane cylinders and performing leak tests?
  • Why is ventilation important around propane storage areas?
  • What is the typical DOT timeframe for cylinder requalification beyond visual inspection?
  • Which device is considered an Electric Barbecue?
  • What is required regarding movement of LPG/CNG containers during work at a site?
  • When wiring and installing CSST, what is the key safety reason bonding is required?
  • If you notice unusually cold spots around fittings or lines, what is the recommended action?
  • What is the relationship between regulator outlet pressure and appliance requirements?
  • In the definition of an open fire, a chamber is considered enclosed when, during combustion, which condition applies?
  • What is the function of pressure relief valves on certain propane storage units?
  • What is the role of a regulator in a propane appliance connection?
  • If a regulator becomes hot or emits an unusual odor, which action is recommended?
  • Why is adequate combustion air essential for propane appliances?
  • How long is a permanent LPG/CNG permit valid?
  • Which item is NOT part of standard annual propane appliance maintenance?
  • To identify propane cylinder contents, what should you rely on?
  • What is the proper sequence for performing a leak test after installing piping?
  • What should be included in an emergency response plan for propane leaks?
  • Where should regulators be placed relative to weather and accessibility?
  • When is a storage permit required for LPG/CNG?
  • Why should cylinder valves be capped when not connected to a system?
  • Why is keeping the cylinder upright important?
  • Why should propane cylinders be stored upright and secured?
  • If you suspect a propane leak, what safety action is recommended?
  • What two-stage regulator benefits?
  • What is the purpose of hydrostatic testing for propane cylinders?
  • Why is it important not to rely on sense of smell to detect propane leaks?
  • Who is responsible for regularly inspecting the compressed gas containers, connections, and appliances for leaks?
  • What safety requirement is appropriate when using CSST or approved flexible piping for residential propane distribution?
  • Under the fire code, a certificate of fitness is required for LPG containers with capacity equal to or greater than how many ounces?
  • What is the typical outlet pressure from a residential propane regulator for appliances?
  • All LPG/CNG containers must be secured in which orientation and not stacked?
  • Can LPG/CNG containers be stored underground?
  • Which classification of compressed gases is characterized by being entirely gaseous at 68°F in a packaging under charged pressure?
  • Which NFPA standard governs the storage and handling of LPG (propane) in the United States?
  • Under what condition should you not attempt to extinguish the flame?
  • What PPE is recommended when performing propane line work?
  • Maintenance should be performed on propane appliances annually?
  • What is the proper sequence for testing a new propane installation?
  • How often are propane cylinders required to be hydrostatically tested?
  • Class B fires are extinguished best by which media?
  • What should you do if a regulator becomes hot or gives off an unusual odor?
  • What should you do if a leak test reveals a leak at a joint that cannot be tightened?
  • What is the purpose of the relief valve on a propane storage system?
  • Class K fires are associated with what?
  • Under the fire code, a certificate of fitness is required for CNG containers with capacity greater than how many standard cubic feet?
  • Why is labeling propane storage areas with contents identification important?
  • Which items should be included in the documentation for a propane installation?
  • Approximately how many inches of water column correspond to 0.4 psi in regulator outlet pressure?
  • Which statement best describes the documentation a propane service company should maintain on jobs?
  • What safety steps are recommended before performing maintenance on propane lines?
  • For each manhole work, how many LPG or CNG containers are allowed and what is their maximum capacity?
  • How many types of LPG containers exist, and what are they?
  • Which item is NOT part of the quick visual check of compressed gas containers?
  • When storing cylinders not in use, which arrangement is recommended?
  • Where should propane cylinders be stored in relation to heat sources?
  • When using CSST with propane, which safety step is required?
  • If you suspect a damaged cylinder or valve, what should you do first?
  • What kind of devices or systems are used to monitor propane leaks in buildings?
  • Why should damaged hoses or regulators be replaced rather than repaired?
  • Who must supervise LPG/CNG work at manholes?
  • Why is mercaptan odorant added to propane, and how is a leak detected?
  • Which consequence could occur if a propane cylinder is not kept upright?
  • What is the main function of a propane regulator in a system?
  • Besides odor, what devices can be used to detect propane leaks?
  • Which statement is true regarding refilling gas containers in NYC?
  • What is the purpose of a regulator in a propane system?
  • How does a two-stage regulator differ from a single-stage regulator?
  • Who is responsible for the safe storage, handling and use of gas containers?
  • What minimum rating is required for portable fire extinguishers used with LPG/CNG?
  • What is the maximum duration that a temporary permit may be valid?
  • Which unit is commonly used to express regulator outlet pressure in residential propane systems?
  • What is the dangerous consequence of exposing gas containers to high temperatures (125°F)?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy